Specifications, Fuse replacement – Sony NVX-P1 User Manual

Page 22

Advertising
background image

22

Notes on the lithium battery
Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately
consult a doctor.

Wipe the battery with a dry cloth to assure a good

contact.

Be sure to observe the correct polarity when

installing the battery.

Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Fuse replacement

When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.

Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.

Specifications

Navigation unit

Operating temperature: 0 ºC to 55 ºC

(32 ºF to 131 ºF)

Storage temperature: –40 ºC to +70 ºC

(–40 ºF to +158 ºF)

Dimensions: Approx. 165

Ч 76 Ч 43.7 mm

(6.5

Ч 3.0 Ч 1.7 in) (w × h × d)

Mass: Approx. 370 g (13.1 oz)
Power requirements:

DC 5 V
(from the supplied 12 V car battery adaptor
(negative earth)/AC power adaptor)

Connection terminal:

External aerial jack
Power jack
USB jack

GPS receiver

Location method: All in view method
Maximum number of tracking satellites: 12 satellites

Speaker

Maximum power output: 0.25 W

Optional accessory

External GPS Antenna: VCA-39

Design and specifications are subject to change
without notice.

WARNING

Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.

Fuse (2 A)

To remove

To tighten

• Lead-free solder is used for soldering all the parts

including circuit component electrodes.

• Halogenated flame retardants are not used in

printed wiring boards.

Advertising