Samsung HT-Q40 - Manual (Page 25)

ENG
48
SETUP
2 1
4 3
In Stop mode,
press
MENU
button.
Press Cursor
button to move to
‘Audio’ and then
press
ENTER button.
In the Speaker
Setup, press the
ENTER button again.
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press
ENTER button.
• For C, SL, and SR, each time the button
is pressed, the mode switches
alternately as follows: SMALL
➝ NONE.
• For L and R, the mode is set to SMALL.
47
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 57).
Note
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your
speaker configuration and whether certain speakers are used or not.
Setting the Speaker Mode
2 1 Press the MENU
button while the
disc tray is open.
Press Cursor
button to move to
‘Setup’ and then
press
ENTER button.
4 3
Press Cursor
button to move to
‘DVD TYPE’ and then
press
ENTER button.
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press
ENTER button.
• DVD Play mode is set to DVD Audio as
factory default setting.
• Powering off the main unit will automatically
switch to the DVD Audio mode.
Note
• Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
contents contained on a
DVD audio disc.
• DVD AUDIO : set to play the default
DVD audio.
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
DVD Playback Mode
• Please use the Registration code to register this
player with the DivX (R) video on demand
format. To learn more, go to www.divx.com/vod.
DivX (R) registration
MOVE ENTER EXIT MOVE ENTER EXIT
MOVE ENTER EXIT
MOVE ENTER RETURN EXIT MOVE CHANGE RETURN EXIT
MOVE ENTER EXIT
MOVE ENTER RETURN
RETURN
EXIT MOVE SELECT RETURN EXIT
MOVE ENTER EXIT
Q40(39~72)_XAC_ENG 3/15/06 13:1912:0 Page 50