Logging, Fm=n fn=[d.d.d.d, Dbgcommlvl=n – Sierra Raven EDGE User Manual

Page 105

Advertising
background image

Raven EDGE

101

20070914

FM=n

Friends Mode ‐ Only allow specified IPs to access the Raven 
modem. 

n=0 : Disable Friends mode 

n=1 : Enable Friends mode ‐ Only packets from friends will 
be accepted, packets from other IP addresses are ignored. 

Fn=[d.d.d.d]

Friends mode IP address. 

n=0‐9 Friends list index 

d.d.d.d = IP address

Using 255 in the IP address will allow any number.

Example: 166.129.2.255 allows access by all IPs in the range 
166.129.2.0‐166.129.2.255. 

Tip: ATF? will return a list of all the current Fn settings.

Logging

This group includes commands specific to the internal log.

Caution: Logging is intended for diagnostic purposes only. Extensive
use of logging features can cause degraded modem performance.

Figure 1-11: AceManager : Logging

*DBGCOMMLVL=n

Set the logging level for the host or module COM port. 

n=0 : No logging 

n=1 : Host COM Port

n=2 : Module COM Port 

Advertising