Sierra Raven EDGE - Manual (Page 109)

Raven EDGE
105 20070914
MLIST and MLISTX are configured by the fields available in
the Addr List group. AceManager automatically differentiates
between them to enter the correct command for the modem.
MLISTid=d.d.d.d
Enters an ID and IP address into the Modbus List. ID is a
decimal value (1 to 100).
• id=ID
• d.d.d.d=IP address or name
MLISTXhexid=d.d.d.d
Enters an ID and IP address into the Modbus List. ID is a
hexadecimal value (0 to 64).
• hexid=ID
• d.d.d.d=IP address or name
Edge/HSDPA
This group includes commands specific to HSDPA, EDGE and
GPRS. If you are not connecting to a modem which uses
HSDPA, EDGE, or GPRS, you will not see this group in the
menu.