Data usage for ip manager server updates, Eairlink.com, Restrictions for modem name – Sierra Raven EDGE User Manual

Page 60

Advertising
background image

IP Manager

Rev 3.0B Feb.08

56

the IP address changes (example, if your Raven is reset or 
is assigned a different IP address).

*IPMGRKEY1 and *IPMGRKEY2: User defined password 
key which is used instead of AirLink secret key when 
using an IP Manager server other than the one provided 
by Sierra Wireless.

Restrictions for Modem Name

For the Modem Name, you should use something which is 
unique but also easy to remember. Your company name or the 
intended function of the modem are recommended. If you 
have more than one modem and want to name them the same, 
you can append a number for each. Since it is an Internet 
domain name, there are some restrictions for the name.

Must begin with a letter or number

Can include a hyphen (‐)

Cannot contain spaces

Must be no longer than 20 characters total 

Data Usage for IP Manager Server
Updates

The IP Manager update is a small packet sent to the server 
with a response sent back to the modem. If you have 
*IPMGRUPDATE1 or *IPMGRUPDATE2 set to any number 
but zero, the modem will send the update not only when it 
receives a new IP address but at the time interval as well. The 
data traffic could be billed by your carrier. 

Each update is a total of 68 bytes from the modem with a 50 
byte total response from the server for a round trip update of 
118 bytes.

Eairlink.com

As a service, Sierra Wireless  maintains a IP Manager servers 
which can be used for any AirLink modem.

interval
(minutes)

total bytes per
day (24 hours)

10

16992 bytes

30

5664 bytes

60

2832 bytes

500

339.84 bytes

Advertising