Sierra Raven EDGE - Manual (Page 98)

Configuration Commands
Rev 3.0B Feb.08 94
*PTINIT=string
Any AT Command string to be passed to the OEM module
before entering PASSTHRU mode, e.g. AT&S1V1, etc.
• string=AT command(s)
*PTREFRESH=n
Number of minutes of inactivity in PASSTHRU mode to
resend the *PTINIT string to the hardware module.
• n=0 : Disabled
• n=1‐255 minutes
*RESETPERIOD=n
In PASSTHRU mode, modem will be reset after this period if
no data has been sent or received. Value is in hours.
• n=0 : Disabled
• n=1‐255 hours
SMTP
SMTP (Simple Mail Transfer Protocol) is the de facto standard
for email transmission across the Internet. The Raven can send
messages using SMTP if it has been configured to use a mail
server.
Note: You cannot send an Email with your Raven unless the Email
server you have configured allows your Raven as a relay host. Talk to
your network administrator to ensure you can send email through the
email server using your Raven.
SMS (Short Message Service) is another way to send messages
via the cellular network. Most SMS commands require the
modem to be in PassThru mode.
Note: SMS may not be supported by your account with your cellular
carrier.