Samsung CLX-318X - Manual (Page 134)

Supplies and accessories_ 2
Checking replaceable’s lifespan
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed. Replace the corresponding
parts, if necessary.
1. Press Menu on the control panel.
2. Press the left/right arrow until System Setup appears and press OK.
3. Press the left/right arrow until Maintenance appears and press OK.
4. Press the left/right arrow until Supplies Life appears and press OK.
5. Press the left/right arrow until the item you want appears and press OK.
• Supplies Info: Prints the supply information page.
• Total: Displays the total number of pages printed in color mode or black
and white mode.
• ADF Scan: Displays the number of pages scanned using the ADF.
• Platen Scan: Displays the number of pages scanned using the scanner
glass.
• Imaging Unit: Displays the number of pages scanned and printed.
• Transfer Belt: Displays the number of pages scanned and printed.
• Fuser: Displays the number of pages scanned and printed.
• TransferRoller: Displays the number of pages scanned and printed.
• Tray 1 Roller: Displays the number of pages scanned and printed.
6. Press Stop/Clear to return to ready mode.
Replacing the toner cartridge
The machine uses four colors and has a different toner cartridge for each
one: yellow (Y), magenta (M), cyan (C) and black (K).
The status LED and the toner-related message on the display indicate
which toner cartridge should be replaced.
At this stage, the indicated toner cartridge needs to be replaced. Before
replacing the toner cartridge, check the model number for the toner
cartridge used in your machine.
Click this link to open an animation about replacing the toner cartridge.
1. Turn the machine off, then wait a few minutes for the machine to cool.
2. Using the handle, completely open the front door.
3. Grasp the handles on the toner cartridge and pull to remove the
cartridge from the machine.
4. Take a new toner cartridge out of its package.
Don’t use sharp objects such as a knife or scissors to open the
toner cartridge package. You could damage the surface of the
toner cartridge.
5. Pull out the hopper sheet from a new toner cartridge.
6. Holding both handles on the toner cartridge, thoroughly rock it from side
to side to evenly distribute the toner.
7. Place the toner cartridge on a flat surface as shown below and remove
the protecting cap.