Samsung HT-TP75 - Manual (Page 9)

GB
16 15
CONNECTIONS
• Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can
enhance a 576i(480i) DVD resolution output to 480p/720p/1080i.
• You do not have to make separate adjustments, since the Home Theater and TV will be automatically
adjust themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an
HDTV and has an HDMI Input jack, output is automatically converted to 1080i resolution
(if supported by the TV).)
• For component video output, only 480P is supported.
• When both HDMI and COMPONENT jacks are connected, COMPONENT video is not displayed.
• See your TV owner's manual for more information on how to select the TV's Video Input source.
Note
Resolution Selection
• This function allows the user to select screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High
Definition)button on the remote control.
• SD(Standdard Definition) means resolution of 480p and HD (High Definition) means resolution
of 720p/1080i.
Example: If the TV supports resolution up to 480p
Press the SD/HD button.
• A 480p video signal is output through the HDMI output.
• If the TV does not support the configured resolution, you will not be able to see the picture
properly.
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video signal digitally without the process of converting to analog.
You can get sharper digital pictures by connecting the video to your TV using an HDMI
connection cable.
HDMI Function
HDMI Audio ON/OFF function
• The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
Press the HDMI AUDIO SELECT button on the
remote control.
• This toggles between “ AUDIO ON ” and “ AUDIO OFF ” on the display.
• AUDIO ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio output is through the TV speakers only.
• AUDIO OFF : Video is transmitted over the HDMI connection cable only,
and audio output is through the home theater speakers only.
• The default setting value of this product is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• If you turn the unit off and on, or switch functions when the HDMI
AUDIO is automatically set to OFF.
Note
Press and hold DCDi button on the remote control for
over 3 seconds.
• Each time the button is pressed, the selection alternates between DCDi ON
and DCDi OFF .
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
DCDi (Directional Correlational Deinterlacing) Function