Silex technology KX-CL400 - Manual (Page 5)

For Your Safety
5
[ WARNING ]
• If metal fragments or water gets into the printer, turn the
printer off and unplug the printer immediately. Contact
an authorized service representative. Operating the
contaminated printer can cause fire or electric shock.
• Do not open covers and do not attempt to repair the
printer yourself. Contact an authorized service
representative.
• Do not alter the printer or modify any parts. Alteration or
modification can cause fire or electric shock.
• Do not place any liquids near the printer. Accidental
spillage of liquid into the printer may cause severe
damage. If this occurs, turn the printer off, unplug the
power cord and contact an authorized service
representative.
• This product uses low frequency electromagnetic fields
and can cause harmful interference to sensitive medical
implant devices. If you have a cardiac pacemaker or
implantable defibrillator, please consult your doctor for
additional suggestion or advice.
• Do not use the printer near medical instruments, which
can cause improper operation.
• Do not use the printer near automatic control machines
(automatic doors, fire alarms, etc.). The electromagnetic
fields can cause improper operation.
[ CAUTION ]
• Do not insert hands inside the printer when closing the
door or cover. Pinching a hand or finger may cause
injury.
• Do not touch hot or heated areas. Touching hot or
heated areas may cause burns.
• If the printer is dropped or damaged, turn the printer off
and unplug the power cord. Otherwise, it may cause fire
or electric shock.
• Be sure to hold the media tray with both hands so that
you do not drop it. The media tray weighs approximately
6.4 kg (14 lbs.) when it is fully loaded.
[ WARNING ]
• Make sure that the printer is installed in a well ventilated
room so as not to increase density of ozone in the air.
Since ozone is heavier than air, it is recommended that
air at floor level be ventilated.
[ WARNING ]
• Do not incinerate toner or toner containers. Toner dust
may cause flashback when exposed to an open flame.
[ CAUTION ]
• Avoid ingestion, inhalation, eye or skin contact.
− If ingestion occurs, drink several glasses of water to
dilute stomach contents.
− If inhalation occurs, remove to fresh air.
− If skin contact occurs, wash thoroughly with soap and
water.
− If eye contact occurs, flush thoroughly with water.
− In all cases, seek medical treatment if adverse
symptoms occur.
• When the toner cartridge is at the end of its life, do not
dispose in fire.
• Keep the toner cartridge out of children's reach. Store in
a cool and dry place.
For USA only
Distributed by Panasonic Digital Document Company,
Unit of Panasonic Corporation of North America
Secaucus, NJ 07094
Operating Safeguards
Ozone Release
Waste Disposal
Caution on Toner Use
Black Toner INGREDIENTS:
Carbon black (1333-86-4)
Silica (68909-20-6)
Charge control agent (31714-55-3)
Polyester resin (2 kinds)
Cyan Toner
Magenta Toner
Yellow Toner INGREDIENTS:
Silica (68909-20-6)
Charge control agent (72869-85-3)
Polyester resin (2 kinds)
Wax (1 kind)
For Your S
a
fety
For Your S
a
fety