Samsung ML-1630W Series - Manual (Page 16)

1 .4
<Introduction>
Control panel overview
display
1
Shows the current status and prompts during an operation. The message shows with specific LEDs as below. LEDs are working with short
message on a display.
• error LED
Blinks when the error occurs on your machine. If it blinks rapidly, the machine has stopped for some reason. Check the display message to
solve the problem.
• paper LED
Blinks when the paper in the tray is empty.
• toner LED
Blinks when the estimated cartridge life of toner is close, or toner cartridge is invalid. Check the display message and replace the
toner cartridge.
• paper jam LED
Lights blink when there is a paper jam in the machine. Check the display message to release the jammed paper.
See page 7.7 about more information on the display messages.
2 Stops an operation at any time. Also, You can print a machine report by pressing this button for about 4 seconds.
3 You can power on or off the control panel by pressing and holding this button for a few seconds.
4 Shows the status of wireless network. When the LED on, the machine is ready.