Sharp UX-340LM - Manual (Page 18)

Loading the Imaging Film
16
When to replace the imaging
film
Replace the imaging film when the
display shows:
Use the following imaging film, which
is available from your dealer or
retailer:
Sharp UX-3CR Imaging Film
FILM END
13
Load paper in the paper tray and
then press the following keys to
initialize the film.
Note: Paper must be loaded before
the film can be initialized. To load
paper, see Loading the Printing
Paper on page 17.
6
INITIALIZE FILM
START/MEMORY
FUNCTION
all_ux340lm.book Page 16 Tuesday, November 28, 2000 3:09 PM