Timer operations – Sharp UX-340LM User Manual

Page 88

Advertising
background image

Timer Operations

86

Timer Operations

The Timer function allows you to set a transmission and/or polling operation to be
performed automatically at a time you specify. One transmission operation and one
polling operation can be set at any one time, and the times they will be performed
can be specified up to 24 hours in advance.

You can use this function to take advantage of lower off-peak telephone rates
without having to be there when the operation is performed.

Note: Only a Speed Dial number can be used to dial the receiving machine.

Setting a timer operation

1

Press these keys:

2

Press # to set a transmission

operation (SEND MODE), or

*

to

set a polling operation (POLLING
MODE).

1

TIMER MODE

3

Press 1 to select SET.

0

5

9

2

Example: 9:25

4

Enter the time at which you want

the operation to take place (2 digits
for the hour and 2 digits for the
minute).

5

Press the

*

key to select A.M. or

the # key to select P.M.

FUNCTION

1

or

POLLING

SEND

or

A.M.

P.M.

6

Press the START/MEMORY key.

START/MEMORY

7

Enter the Speed Dial number of the

receiving fax machine.

If this is a polling operation, go to
Step 10.

0

5

(Example)

START/MEMORY

8

Press the START/MEMORY key.

all_ux340lm.book Page 86 Tuesday, November 28, 2000 3:09 PM

Advertising