Sharp UX-340LM User Manual

Page 96

Advertising
background image

Maintenance

94

If SET PAPER & PRESS START
KEY appears in the display, make
sure the paper is inserted correctly
and then press the START/
MEMORY
key.

Make sure that all dirt and stains
(such as correcting fluid) are
removed, as dirts and stains will
cause vertical lines on transmitted
images and copies.

Adhesive cellophane tape is useful
for removal of debris from the
rollers.

8

Pull the paper release plate toward

you, reinsert the paper in the paper
tray, and then push the paper
release plate back down.

Document
rollers

Scanning glass

Caution!

When wiping, take care not to
damage any of the protruding parts
on the underside of the operation
panel.

The housing

Wipe the external parts and surface
of the machine with a dry cloth.

Caution!

Do not use benzene or thinner.
These solvents may damage or
discolor the machine.

Scanning glass and rollers

Clean the scanning glass and rollers
frequently to ensure the quality of
transmitted images and copies. Open
the operation panel (grasp the finger
hold and pull up), and wipe the
scanning glass and rollers with a soft
cloth.

all_ux340lm.book Page 94 Tuesday, November 28, 2000 3:09 PM

Advertising