Sony 4-131-978-11(1) - Manual (Page 44)

44
You can select the language for the on-
screen displays, set the recording timing to
prevent the programmes being cut off at the
start/end of the recording, or select whether
to download the GUIDE Plus+ data at night.
1
In step 5 of “Changing the GUIDE
Plus+ System Settings (Setup)” on
page 43, select “Personal
Preferences,” and press
.
2
Select an item using M/m, and press
. Then set each item.
“Language”: Select a language for the
on-screen display using
M/m, and press
.
“Recording Timing”: Set the additional
recording time before/after the
scheduled recording start/end time using
M/m, and press
.
“Overnight Download”: Select whether
to download the GUIDE Plus+ data at
night using
M/m, and press .
To reset the GUIDE Plus+ system settings,
we recommend that you run “Easy Setup”
again in “Initial Setup” (page 97).You can
also reset country/region and postal code
using the following procedure.
www.europe.guideplus.com
1
In step 5 of “Changing the GUIDE
Plus+ System Settings (Setup)” on
page 43, select “Start Installation
Sequence,” and press
.
The display asks for confirmation.
2
Select “Yes” using M/m, and press
.
3
Select a country/region using M/m,
and press
.
4
Enter your postal code using </M/
m/,, and press .
The recorder starts downloading the
GUIDE Plus+ data.
A message appears when the download
is finished.
5
Press .
Language/Recording timing/
Overnight Download settings
(Personal Preferences)
Resetting the GUIDE Plus+
system settings (Start
Installation Sequence)