Erasing a title (erase), Erasing a section of a title (a-b erase) – Sony 4-131-978-11(1) User Manual

Page 67

Advertising
background image

67

Era
si

n

g

an
d

Edi
ting

1

Press TITLE LIST.

2

Select the title you want to erase
using
M/m.

To erase the selected title only, go to
step 5.

3

Press MARKER.

A check mark appears next to the
selected title.
• To clear the check mark, press

MARKER again.

4

Repeat steps 2 and 3 to select all of
the titles you want to erase.

5

Press the red button (“Edit”) to select
“Erase,” and press

.

The display asks for confirmation.

6

Select “Yes,” and press

.

The selected titles are erased.

b

Titles on DVD+RWs/DVD+Rs or DVD-RWs/
DVD-Rs (Video mode) cannot be erased.

You can select a section (scene) in a title and
erase it. Note that erasing scenes in a title
cannot be undone.

1

Press TITLE LIST.

2

Select the title you want to partially
erase using
M/m.

3

Press the red button (“Edit”) to select
“A-B Erase,” and press

.

The “A-B Erase” display appears.

4

Press N to start playback.

5

Select point A using m/M, etc.,
and press

(“Start”).

The start point (point A) is set.

6

Select point B, and press

(“End”).

The end point (point B) is set.
• To reset either point A or B, select

“Start” or “End” using

</,, and

repeat from step 5 or 6.

7

Select “Erase,” and press

.

The display asks for confirmation.

8

Select “Yes,” and press

.

The scene is erased.

9

Select “Finish,” and press

to exit.

To cancel “A-B Erase”

Press O RETURN. The Title List appears.

b

• Images or sound may be momentarily

interrupted at the point where you erase a section
of a title.

• Sections shorter than about 3 seconds may not be

erased.

Erasing a title (Erase)

Erasing a section of a title
(A-B Erase)

HDD

-R

VR

-RW

VR

HDD

,continued

Advertising
This manual is related to the following products: