Dubbing from dv camcorder, Preparing for dv camcorder dubbing – Sony 4-131-978-11(1) User Manual

Page 78

Advertising
background image

78

Dubbing from DV
Camcorder

This section explains dubbing with a DV
camcorder via the DV IN jack on the front
panel. If you want to dub by way of the
LINE IN jacks, see “Recording from
Connected Equipment” on
page 45.
The DV IN jack on this recorder conforms to
the i.LINK standard.
Follow the instructions in “Preparing for DV
camcorder dubbing,
” and then move on to
the section on dubbing. For more
information about i.LINK, see “About
i.LINK” on
page 114.

Before you start DV camcorder dubbing…

• Check that the HDD of the recorder has

enough available space for the dubbing
(page 82). You can open up disc space by
erasing titles (page 67).

How chapters are created

The contents dubbed to the HDD become a
single title. This title is divided into chapters.
Chapters are created for each shooting
session on the tape and each pause during
dubbing.
To use this recorder’s auto chapter setting,
be sure to correctly set the clock on your DV
camcorder before shooting.

You can connect a DV camcorder to the DV
IN jack on the recorder to dub or edit from a
DV/Digital8 format tape. Operation is
straightforward because the recorder will
fast forward and rewind the tape for you –
you do not need to operate your DV
camcorder.
Refer as well to the instruction manual
supplied with the DV camcorder before
connecting.

b

• You cannot make a recording while DV

camcorder dubbing.

• The DV IN jack is for input only. It will not

output signals.

• You cannot use the DV IN jack when:

– signal input to the DV IN jack on the front

panel or recorder operation cannot be
performed correctly when using a digital video
camera (see “About i.LINK” on page 114).
Connect the camera to the LINE IN jack and
follow the instructions of “Recording from
Connected Equipment”
on page 45.

– the input signal is not in DVC-SD format. Do

not connect a MICRO MV format digital video
camera even if it has an i.LINK jack.

– the images on the tape contain copy protection

signals, which limit recording.

• Set the recorder and DV camcorder to the same

colour system (page 92).

• When the total number of titles on the HDD

exceeds 999, you cannot dub the contents on the
DV camcorder to the recorder.

Hookups

1

Insert the source DV/Digital8 format
tape into your DV camcorder, and set
the DV camcorder to video playback
mode.

Preparing for DV camcorder
dubbing

DVD recorder

to DV IN

i.LINK cable
(not supplied)

DV output

DV camcorder

: Signal flow

Advertising
This manual is related to the following products: