Setting up the channel list, Using auto program – Sony KP 46WT520 User Manual
Page 40
39
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Setting Up the Channel List
After you finish connecting the TV, you need to run the Auto
Program feature, which automatically creates a list of available
channels. The Auto Program screens appear when you turn on your
TV for the first time after hooking it up.
Using Auto
Program
To run Auto Program the first time you turn on your TV
1
Press
POWER
to turn on the TV.
The Initial Setup screen appears.
2
When prompted to start Auto Program, press the
CH+
button to
start Auto Program.
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on page 67.
To reset the TV to factory settings
1
Press
POWER
to turn on the TV.
2
Hold down
RESET
on the remote control.
3
Press
TV POWER
on the TV. (The TV will turn itself off, then back
on.)
4
Release
RESET
.
AX1X.book Page 39 Wednesday, June 30, 2004 9:21 AM