Sharp CDPC3500 - Manual (Page 11)

HK <P=001>
SOUND CONTROL
0 1 2 29 30 MAXIMUM
.....
■ Volume
(Main unit operation)
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned counterclockwise, the volume will
decrease.
(Remote control operation)
Press the VOLUME button to increase the volume and the
VOLUME button to decrease the volume.
FLAT ROCK POPS
JAZZ CLASSIC VOCAL
■
Pre-programmed equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed,
the current mode setting will be displayed. To change to a dif-
ferent mode, press the EQUALIZER (EQUALIZER MODE) button
repeatedly.
FLAT: The sound is not modified.
ROCK: Bass and treble are emphasized.
POPS: Bass and treble are slightly emphasized.
JAZZ: Treble is cut a little.
CLASSIC: Treble is reduced a lot.
VOCAL: Vocals (midrange tones) are emphasized.
1 ~ 10
Note:
When the equalizer mode is being used, the Dolby Pro Logic
Surround mode is canceled.
■
Extra bass (X-BASS)
When the power is first turned on, the unit will enter the extra
bass mode which emphasizes the bass frequencies, and "X-
BASS" will appear.
To cancel the extra bass mode, press the X-BASS/DEMO (X-
BASS) button.
"X-BASS" will go out.
■
Balance
(Remote control operation)
Press the BALANCE
Z (LEFT) button to decrease the level of
the right speaker, and press the BALANCE Y (RIGHT) button to
decrease the level of the left speaker.
(Main unit) (Remote control)
(Main unit) (Remote control)
(Main unit) (Remote control)
X-BASS indicator
CD-PC3500(SEC) TINSE0281AWZZ
10