Sony RDR-GX700 - Manual (Page 89)

89
Se
tti
n
gs
a
nd
Adj
u
st
m
e
n
ts
◆Line1 Output
Selects a method of outputting video signals for
the LINE 1-TV jack.
Notes
• If your TV does not accept S-video or RGB signals, no
picture appears on the TV screen even if you select “S
Video” or “RGB.” See the instructions supplied with
your TV.
• You cannot select ”RGB” when “Component Out”
above is set to “On.”
• SMARTLINK is available only when “Video” is
selected.
◆Line3 Input
Selects a method of inputting video signals for the
LINE 3/DECODER jack. The pictures will not be
clear if this setting does not match the type of
video input signal.
◆Line3 Output
Selects a method of outputting video signals for
the LINE 3/DECODER jack.
Line4 Input
Selects a method of inputting video signals for the
LINE 4 IN jack on the rear panel of the recorder.
Audio Settings (Audio)
The Audio Setup allows you to adjust the sound
according to the playback and connection
conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Audio,” and press ENTER.
The Audio Setup appears with the following
options. The default settings are underlined.
Audio ATT (attenuation)
If the playback sound is distorted, set this item to
“On.” The recorder reduces the audio output level.
This function affects the output of the following
jacks:
– LINE 2 OUT AUDIO L/R jacks
– LINE 1-TV jack
– LINE 3/DECODER jack
RGB Outputs RGB signals.
Video Outputs video signals.
S Video Outputs S-video signals.
Video/RGB Inputs video signals or RGB
signals.
Decoder Select this when connecting to a
PAY-TV/Canal Plus decoder.
S Video Inputs S-video signals.
Video Outputs video signals.
S Video Outputs S-video signals.
Video Inputs video signals.
S Video Inputs S-video signals.
On Select this when the
playback sound from the
speakers is distorted.
Off Normally select this
position.
Settings
Video
Audio
Features
Options
Easy Setup
Audio ATT :
Audio DRC :
Downmix :
Digital Out :
Dolby Digital :
MPEG :
DTS :
Off
Standard
Dolby Surround
On
D-PCM
PCM
Off
SETUP
, continued