Tuner band setting, Manual clock set – Samsung DVD-V2500 User Manual
Page 10
Tuner Band Setting
19
This feature allows you to manually set the DVD-VCR’s tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
• Use this setting only if Auto Setup detected the incorrect tuner
band, i.e. channels are coming in on the wrong channel numbers.
1
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2
Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTERto select.
3
Select “Channel”
Using the up and down buttons, move the selection cursor to
“Channel”, then press ENTER to select.
4
Select “Ant/Cable”
Move the selection arrow to “Ant/Cable” then press right to select
from the following options:
• Antenna - Indicates that the DVD-VCR is connected to an indoor
or outdoor VHF/UHF antenna.
• Cable TV - Indicates that the DVD-VCR is connected to Cable TV.
1
CHANNEL SETUP
Ant/Cable: [Cable TV]
Auto channel memory
Channel add/delete
RETURN
CHANNEL SETUP
Ant/Cable: [Antenna]
Auto channel memory
Channel add/delete
RETURN
Manual Clock Set
18
If Auto Setup was unable to find a local TV station to set the DVD-
VCR’s internal clock, follow these instructions to set the date/time
manually.
NOTE: It is important to set the clock for accurate Timer
Recording.
1
Open “SETUP MENU”
With the DVDin stop mode, press the SETUP button.
2
Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTERto select.
3
Select “Clock”
Using the up and down buttons, move the selection cursor to
“Clock Set/Adjust,” then press ENTERto select.
4
Select “MANUAL”
Move the selection arrow to “MANUAL”, then press ENTER to turn
this feature “On.”
• The “Set Clock Menu” will change as shown.
5
Set the Clock
Press LEFT/RIGHTto select each of the following options, then
press UP/DOWNto set each option:
• Set Hour
– Set the hour using the up and down buttons.
• Set Minute – Set the minute using the up and down buttons.
• Set Month – Set the month using the up and down buttons.
• Set Day
– Set the day using the up and down buttons.
• Set Year
– Set the year using the up and down buttons.
6
Confirm Settings
Press the RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.
1 , 3
CLOCK SET/ADJUST
TIME DATE YEAR
1 2 : 0 0
A
M
1/01 2002 TUE
RETURN
CLOCK SET/ADJUST
A u t o
M a n u a l
RETURN
ENTER
00006A DVD-V2500/XAC-Eng2 11/12/02 7:05 PM Page 18