Rf output channel, Auto power off, Front panel dimmer – Samsung DVD-V2500 User Manual
Page 12
RF Output Channel
23
Auto Power Off
22
Front Panel Dimmer
You can set the Front Panel Display to be bright all the time, dim
all the time, dim during power off.
1
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2
Select “Option”
Using the up and down buttons, move the selection cursor to
“Option,” then press ENTER to select.
3
Set “Panel Display”
Move the selection bar to “Panel Display,” then press right to select
from the following options:
• Auto dim– Front Panel Display will dim automatically during
power off.
• Dim – Front Panel Display will be dim all the time.
• Bright – Front Panel Display will be bright all the time.
1
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2
Select “Option”
Using the up and down buttons, move the selection cursor to
“Option” then press ENTER to select.
3
Select “RF Output Channel”
Move the selection bar to “RF Output Channel”, then press right
to change.
4
Change “RF Output Channel”
Press Return to change. A message will appear on your TV.
Then press ENTER to change.
5
Change “TV Channel”
A message will appear on your TV. When the message disappears,
change your TV to channel 3 or 4 to match the RF output channel
of the player.
1
Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2
Select “Option”
Using the up and down buttons, move the selection cursor to
“Option,” then press ENTERto select.
3
Select “Auto Power Off”
Move the selection bar to “Option Setup”, then press right to
select from following options:
• Off – Auto power off is disabled.
• 1Hr – DVD-VCR will auto shut off 1 hour after the last button is
pressed.
• 2Hr – DVD-VCR will auto shut off 2 hours after the last button is
pressed.
1
1
00006A DVD-V2500/XAC-Eng2 11/12/02 7:05 PM Page 22