Samsung DVD-V2500 - Manual (Page 17)

Special Playback Features
33
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the
ll
(Play/Pause) button.
1 Pause
Press the ll (Play/Pause) button on the remote control during
playback.
• The picture will pause and the audio will mute.
• To resume playback, press the
ll (Play/Pause) button.
• If the player is left in Pause mode for 5 minutes, it will stop
automatically.
2 Frame Advance (Step)
While in Still or Play mode, rotate JOG DIAL on the remote control
to advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press
ll (Play/Pause) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3 Skip Forward/Back
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (
l / l ) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
Search Forward/Back
While a disc is in Play mode, rotate shuttle ring on the remote
control and, press the Forward/Back (
/ ) buttons on the
remote control or front panel to visually search forward/backward at
2X - 4X - 8X - 16X - 32X - 128X speed. Press
ll (Play/Pause)
button to resume normal speed.
4 Slow Motion
During playback, press the ll (Play/Pause) button to Still the
image. Press and hold Forward/Back buttons on the Remote
control.
• Press and hold the Forward button( ) on the remote and
front panel to increase or decrease the speed from normall
playback to 1/8, 1/4, or 1/2 speed.
• Audio is muted during slow motion playback.
• Shuttle ring on the remote control rotere the shuttle riug on
the remote control to activate slow motion playback.
Press the
ll (Play/Pause) button to resume normal playback.
5 Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ll
(Play/Pause) button.
• Press the ■ (Stop) button twice to completely stop playback.
The next time you press ll (Play/Pause), the disc will start over
from the beginning.
1
2
3 3
5
3
A/V Receiver Connections
32
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
• If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
1 Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUTjacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
• Optical
• Coaxial
• Use whichever connection is available on your A/V Receiver.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
OR
00006A DVD-V2500/XAC-Eng2 11/12/02 7:05 PM Page 32