Auto play, Special vcr playback features, S-vhs playback – Samsung DVD-V2500 User Manual

Page 28: Tracking

Advertising
background image

Auto Play

55

Special VCR Playback Features

54

If you want your videotapes to play automatically when you insert
them, turn on Auto Play.

NOTE: Only tapes that are missing the Record Safety Tab will

play automatically when inserted.

1

Open the “SETUP MENU”

With the DVD in stop mode, press the SETUP button.

2

Select “VCR Setup”

Using the up/down and left/right buttons, move the selection arrow
to “VCR Setup,” then press ENTER to select.

3

Select “Auto Play”

Move the selection arrow to “Auto Play,” then press right to select
from the following options:
• On - The VCR will automatically begin playing a video tape

when it is inserted, as long as the safety tab of the cassette
has been removed.

• Off - Auto play is disabled.

4

Tape Length

Press the left button to select the video cassette length.
This information is usually printed on the tape box. The menu
cycles through: T120, T160 or T180. Once the type of cassette is
set, the VCR can display the amount of time remaining on the tape
when you press the DISPLAY button.

5

Auto Repeat

In the VCR Setup “Auto Repeat” sets the VCR to play a tape
repeatedly [unless a tape control is activated (stop, fast forward or
rewind)].

S-VHS Playback

The DVD-VCR allows you to playback high quality S-VHS tapes.

1

Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

2

Start Playback

Press Play/Pause on the remote control to begin playback of the
S-VHS tape.

The Tracking adjustment removes the white lines that sometimes
appear during playback because of slight differences in recording
decks. The TRK button will automatically align the recorded tracks
with the playback heads to solve this problem. You may also set
tracking manually.

1

Adjust Tracking Manually

During playback, press the TRK

or TRK

buttons to remove

the white lines from the picture.

1

1

While a videotape is playing, you can enjoy a variety of special
playback features, including Still, Frame Advance, Skip, Repeat, and
more. Press the Play button again to resume normal playback.

1

Still

From Play mode, press Play/Pause to still a single frame.

2

Frame Advance

From still mode, press JOG DIAL to advance to the next frame.

3

Cue/Review

From Play mode, press F.Forward (

) or Rewind (

) to

cue/review at two speeds:
• Picture Search — Press and release to advance the tape

forward or backward at 5 times normal speed.

• Jet Search — Press and hold to advance the tape forward or

backward at 7 times normal speed.

4

Repeat

From Play mode, press Repeat to review the last 5 seconds of tape
(SP mode).

5

Shuttle

From Play mode, Shuttle >> gradually increases the cue speed
from Double-Speed playback to Picture Search to Jet Search.
Shuttle << gradually slows down the tape, then goes into Slow
mode, Still mode, Reverse Picture Search and Reverse Jet Search.

Press the DISPLAY button to see the

current status of the VCR deck, as well

as the tape counter position and

record speed.

3

3

PLAY

0:00:00 SP

Tracking

00006A DVD-V2500/XAC-Eng3 11/12/02 7:04 PM Page 54

Advertising