Siemens HD2528U EN - Manual (Page 12)

Getting Started
English 10
CAUTION:
To avoid burns, place oven racks in desired positions before turning
oven on. Always use oven mitts when the oven is warm. If a rack
must be moved while the oven is hot, do not let oven mitts contact
hot elements.
Inserting Racks Into Oven
1. Grasp rack firmly on both sides.
2. Tilt rack up to allow stop into rack guide.
3. Bring rack to a horizontal position and press the rest of the way in. Rack
should be straight and flat, not crooked.
Removing Flat Racks From Oven
1. Grasp rack firmly on both sides and pull rack toward you.
2. When the stop is reached, tilt rack up and pull the rest of the way out.
Extension Oven Rack (some models) The Full Extension Rack allows for easier access to cooking foods. The bottom
section extends as far as the standard flat rack. However, the top section
extends beyond the bottom section bringing the food closer to the user. To order
a full extension rack, contact Service or a dealer near you.
Removing and Replacing
Note:
The full extension rack must be in the closed position when removing
and replacing. Grasp the entire rack (both sections).
1. Grasp the bottom section and pull straight out.
Figure 4: Inserting a Rack
Insert rack with the back of the rack
toward the back wall of the range.
Back of rack
Front of rack
Figure 5: Full Extension Rack
Top Rack
Back of Rack Pan Stops
Bottom
Rack
Stops
Top Rack Rest
Rack Guide
Front of Rack
Top Rack
Stop (Ball)