Samsung ML-2510 - Manual (Page 25)

5.6
<Loading print media>
1 Load the paper in the manual tray with the side to be printed on
facing up.
2 Adjust the manual tray paper width guides to the width of the paper.
Do not force too much, or the paper will bend, which could result in
a paper jam or skew.
3 When you print a document, set the paper source to Manual
Feeder and select the appropriate paper size and type in the
software application. See the Software Section.
4 Print a document.
5 Press the Cancel button.
The printer picks up the print media and prints.
6 Insert the next sheet into the manual tray and press the Cancel
button.
Repeat this step for every page to be printed.
Note
• If you do not press the Cancel button, after a pause the printer
will automatically pick the print media.
Knowing an output location
The output tray collects paper face down, in the order in which the sheets
were printed.
Note
• If you continuously print many pages, the surface of the output
tray may become hot. Be careful not to touch the surface, and
especially keep children away from the surface.
• The output tray can hold up to 100 sheets of 75 g/m 2 (20 lb)
plain paper. Remove the pages so that the tray is not
overloaded.
1
1 output tray