Samsung SF-560 - Manual (Page 29)

G ETTING S TARTED 1.14
You can enter alphanumeric characters using the number keypad, and
include special symbols by pressing the 0 button.
For details on how to use the number keypad to enter alphanumeric
characters, see the following section.
If you want to enter the same letter or number in succession (e.g. SS,
AA, 777), enter one digit, move the cursor by pressing the
X button
and enter the next digit.
If you want to insert a space in the name, you can also use the X
button to move the cursor to skip the position.
6 Press Enter when the name on the display is correct.
7 Press Stop/Clear to return to Standby mode.
Entering Characters Using the Number Keypad
As you perform various tasks, you need to enter names and numbers. For
example, when you set up your machine, you enter your name or your
company’s name and telephone number. When you store one or two digit
speed dial or group dial numbers, you may also enter the corresponding
names.
To enter alphanumeric characters:
1 When you are prompted to enter a letter, locate the button labeled
with the character you want. Press the button until the correct letter
appears on the display.
For example, to enter the letter O, press 6, labeled with “MNO.”
Each time you press 6, the display shows a different letter, M, N, O
and finally 6.
You can enter special characters, such as space, plus sign, and so on.
For details, see “Keypad Letters and Numbers” on page 1.15.
2 To enter additional letters, repeat step 1.
If the next letter is printed on the same button, move the cursor by
pressing the
X button and then press the button labeled with the letter
you want. The cursor moves to the right and the next letter appears on
the display.
You can enter a space by pressing the button.
3 When you finish entering letters, press Enter.