Sharp AHT-E300 User Manual

Page 12

Advertising
background image

AHT-E300 ADSL ROUTER

8

Click [TCP/IP Properties] button, and IP address tab.
You can choose one of the following options to set TCP/IP values.

Obtain an IP address
automatically
(Recommended)

If you want to obtain an IP address of PC
automatically from DHCP server of AHT-
E300, check on this radio button.

Specify an IP address

If you want to use an assigned (static) IP
address,

and set the IP Address as 10.0.0.1,

Subnet Mask as 255.255.255.0 and Gateway
10.0.0.2.

Step 5



Step 6

Click [OK] button. Windows may ask for original Windows installation
disk. Insert the installation disk if needed.

Step 7

Windows will ask you to restart the PC. Click [Yes] button.
The TCP/IP settings of PC have been completed.

Notice: When you want to use static IP address, you should set the IP
address as the same subnet with AHT-E300 ADSL Router.

Advertising