Optional features – Sharp XE-A212 User Manual

Page 23

Advertising
background image

Manual tax 1-4 system (Manual entry method using preset percentages)

This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is performed using
the corresponding programmed percentages when the

t

key is pressed just after the

s

key.

After this calculation, you must finalize the transaction.

Automatic VAT 1 and automatic tax 2-4 system
This system enables the calculation in the combination with automatic VAT 1 and automatic tax 2 through 4. The
combination can be any of VAT1 corresponding to taxable 1 and any of tax 2 through 4 corresponding to taxable
2 through taxable 4 for each item. The tax amount is calculated automatically with the percentages previously
programmed for these taxes.

• The tax status of PLU/subdepartment depends on the tax status of the department which the

PLU/subdepartment belongs to.

• VAT/tax assignment symbol can be printed at the fixed right position near the amount on the

receipt as follows:

VAT1/tax1

A

VAT2/tax2

B

VAT3/tax3

C

VAT4/tax4

D

When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number
assigned to VAT/tax rate will be printed. For programming, please refer to “Various Function
Selection Programming 1” (Job code 66) on page 53.

s

t

21

OPTIONAL FEATURES

Percent calculations (premium or discount)

Your register provides the percent calculation for the subtotal and/or each item entry depending on the
programming.

• Percentage: 0.01 to 100.00% (Depending on the programming)

Application of preset rate (if programmed) and manual rate entry are available.

Percent calculation for subtotal

4

@

140

'


s

10

%
A

Receipt print

Key operation example

Auxiliary Entries

1

A212_2 FOR THE OPERATOR 03.7.5 8:01 AM Page 21

Advertising