Samsung HT-X710 - Manual (Page 38)


playback
USING BlUETOOTH
You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a new technology that enables Bluetooth-compliant devices to easily interconnect
with each other using a short wireless connection.
A Bluetooth device may cause a noise or malfunction, depending on usage.
When a part of the body is in contact with the receiving/transmitting system of the Bluetooth device
or the Home Cinema System.
Electrical variation from obstructions caused by a wall, corner or office partitioning.
Electrical interference from same frequency-band devices including medical equipment, microwave
oven and wireless LAN.
Pair the Home Cinema System with the Bluetooth device while maintaining a close distance.
The further the distance is between Home Cinema System and Bluetooth device, the worse the
quality is. If the distance exceeds the Bluetooth operational range, the connection is lost.
The Home Cinema System only supports Middle Quality SBC data(up to 237kbps@48kHz), and does
not support High Quality SBC data([email protected]).
In poor reception-sensitivity areas, the Bluetooth connection may not work properly.
The Home Cinema System has an effective reception range of up to 10 meters in all directions if there
are no obstacles. The connection will be automatically cut off if the distance is out of this range. Even
within this range, the sound quality may be deteriorated by obstacles such as walls or doors.
To connect the Home Cinema System to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth-compliant stereo headset function.
Press the FUNCTION button on the front panel of the home cinema system repeatedly until
"BT AUDIO" appears.
The mode switches as follows :
DVD/CD  DIGITAl IN  AUX 1  AUX 2  USB 
BT AUDIO  TUNEr.
You will see “WAIT” for 2 seconds and then “rEADY” on
the front display of the Home Cinema System.
Select the Bluetooth menu on Bluetooth device you want to
connect. (refer to Bluetooth device's user manual)
Select the Stereo headset menu on the Bluetooth
device.
You will see a list of scanned devices.
Select "Samsung Home Theater" from the searched list.
When the Home Cinema System is connected to the
Bluetooth device, the Home Cinema System will display
"CONNECT" on the front display, followed by the device name
of the connected Bluetooth device.
The Home Cinema System connection is complete.
Play music on the connected device.
You can listen to the music playing on the connected Bluetooth device over the home cinema
system.
You may be required to enter a PIN code(password) when connecting the Bluetooth device to the home cinema
system. If the PIN code input window appears, enter <0000>.
The Home Cinema System may control play related function only when connected device supports the
function.
The Home Cinema System only supports Middle Quality SBC data(up to 237kbps@48kHz), and does not
support High Quality SBC data([email protected]).
~
~
~
~
~
~
~
~
~
1.
~
~
.
.
~
4.
~
~
.
~
M
`
`
`
Connect
Bluetooth devide
HT-X710_ELS_ENG_0408.indd 38 2008-04-19 �� 2:39:04