Sanus Systems ELM202 User Manual

Elm202 surge protector, Specifi cations, Warranty

Advertising
background image

Sanus Systems
2221 Hwy 36 West
Saint Paul, MN 55113 USA

Customer Service
800-359-5520 • 651-484-7988 • [email protected]

sanus.com

©2010 Milestone AV Technologies, a Duchossois Group Company.
All rights reserved. Sanus is a division of Milestone.
All other brand names or marks are used for identifi cation purposes and are trademarks of their respective owners.

ELM202 Surge Protector

(6901-100200 <02>)

Specifi cations

2100 Joule surge suppression

EMI/RFI noise fi ltration

Gold-plated coaxial input and outputs

UL Listed

UL Electrical Rating: 15A Max/125Vac/60Hz/1875W

Voltage Protection Rating: 400V(L-N) 500V(L-G) 400V(N-G)

Warranty

Your Sanus ELM202 Surge protector has a fi ve year product warranty
against manufacturer’s defects. If you have any questions or experience
any problems with your Sanus Elements Surge Protector, please contact
Sanus Systems Customer Service at 1-800-359-5520.

Both the “Ground” and “Surge” lights illuminate to
indicate that the surge protector is working. If
either light fails to illuminate, replace the surge
protector.

From wall phone outlet

To phone / fax modem

From wall, DSS, cable, or other coaxial output

To TV, VCR, or other coaxial input

GROUND

SURGE

OUT

IN

OUT

IN

IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT

CAUTION:

Avoid potential personal injury or property damage!

Do not disassemble the surge protector. Disassembling will void the
warranty and may cause serious personal injury.

Disconnect the surge protector during lightning storms.

To Reduce the Risk of Electric Shock - Use Only in Dry Locations Indoors!

Risk of Electrical Shock. Do not plug into another relocatable power tap.

This device features an internal protection that will disconnect the surge
protective component at the end of its useful life but will maintain power
to the load - now unprotected. If this situation is undesirable for the
application, follow the manufacturer’s instructions for replacing the device.

Do not install this device if there is not at least 10 meters (30 feet) or more
of wire between the electrical outlet and the electrical service panel.

The input plug of this power tap is intended to serve as the disconnect
device, it shall be easily accessible and withdrawn.

Do not use this product for any purpose not explicitly specifi ed by Sanus
Systems.

If you do not understand these instructions, or have doubts about the
safety of the installation, assembly or use of this product, contact Sanus
Systems Customer Service or call a qualifi ed contractor.

Sanus Systems is not responsible for damage or injury caused by incorrect
assembly or use.

Advertising