Other information, Programming the remote control – Sony KP-46WT510 User Manual

Page 73

Advertising
background image

70

Model name1[KP-46WT510] Model name2[KP-51WS510] Model name3[KP-57WS510] Model name4[KP-65WS510]

[4-094-605-12]

Other Information

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

If you have video equipment other than Sony brand that you want to control
with the projection TV’s remote control, use the following procedures to
program the remote control.

From the “Manufacturer’s Codes” listed on page 72, select the three-digit
code number for the manufacturer’s code for your component. If more than
one code number is listed, start with the number listed first. Use the code
number to complete the following procedure.

To program a cable box or a satellite receiver

1

Open the panel of the remote control.

2

Press

CODE SET

inside the panel.

3

Close the panel and press

SAT/CABLE (FUNCTON)

.

4

Enter the three-digit manufacturer’s code number using the

0-9

buttons.

5

Press

ENTER

.

6

To check if the code number works, aim the projection TV’s remote
control at the component and press the green

POWER

button that

corresponds with that component. If it responds, the programming is
completed. If not, try using the other codes listed for that manufacturer.

Sony
Equipment

Switch Position
on Remote Control

Programmable
Code Number

Beta, ED Beta VCRs

AV1

303

8 mm VCR

AV2

302

VHS VCR

AV3

301

DVD Player

DVD

751

The equipment must have infrared (IR) remote capability in order to be
used with the remote control.

Advertising
This manual is related to the following products: