Sonance S623LCR - Manual

Sonance Symphony ® Series
S623
L C R
Home Theater Speaker
Specifications:
Sonance Symphony S623
L C R
Tweeter: 1" (25mm) Silk dome, Ferrofluid-
cooled
Woofer: Two 6½" (165mm) Carbon fiber
cones, rubber surrounds
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum;
135 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Grille Material: Per forated Aluminum
Adjustments: ±3dB Tweeter Level
Dimensions (W x H x D): 16" x 8 1 /
8
" x 3 7 /
8
"
(407mm x 206mm x 98mm)
Cutout Dimensions (W x H): 14½" x 6¾" (368mm x 171mm)
Shipping Weight: 7 lbs (3.2kg) each
Features:
• Traditional dual woofer/single tweeter home
theater speaker configuration.
• Visually and sonically matches other Sonance
Symphony ® series speaker models.
• Dual carbon fiber cone woofers produce deep,
powerful bass and provide high-output low-
distortion music and film dialog.
• Fits standard 16” on-center stud construction.
• Exclusive new FastMount
® tabs hold the speaker in
the mounting hole during installation, allowing the
installer to let go of the speaker to pick-up tools or
other items.
• The Rotolock ® mounting system makes installation
quick and easy.
• A three position tweeter adjustment switch lets
you balance the speaker’s high-frequency energy
to better complement the room’s setup and
acoustics.
• Removable IR plug accommodates a Sonance
OptiLinQ ® SMR1 or SMR1P IR receiver, allowing
convenient front-of-the-room aiming for system IR
remote controls.
• Paintable perforated aluminum grille with built-in
scrim cloth.
S ONANCE S YMPHONY ®
S623 LCR S PEAKER
T h e n e w S o n a n c e S y m p h o n y ® S 6 2 3 L C R h o m e t h e a t e r
speaker is a visual and sonic match for our best-selling
Sonance Symphony speaker line.
Incorporating the same drivers as the Symphony S623 T
and S623 T R but in a traditional dual woofer/single
tweeter home theater speaker format, the S623 L C R makes
an ideal center-channel counterpar t for any Symphony
series left and right channel speaker pair in small or
medium-sized home theater systems. And by using the
S623
L C R in all three front-channel positions (left, center
a n d r i g h t ) a n d o t h e r S y m p h o n y s e r i e s s p e a k e r s a s
surround channels, an exceptionally high-per formance
home theater system can be assembled.
Installation is quick and easy thanks to the RotoLock ®
mounting system. Exclusive FastMount ® tabs hold the
speaker in the mounting hole during installation, allowing
the installer to let go of it to pick-up tools or other items.
And the S623
L C R is designed to fit between standard 16”
on-center studs (the standard stud spacing in the USA).
The new Sonance S623 L C R is the per fect center-channel
match for any Sonance Symphony series speaker pair,
giving dealers and installers all the tools they need to
create exceptional home theater systems in a variety of
configurations.