Conducting a hotsync operation via a network, 119 advanced hotsync – Sony PEG-T415G User Manual

Page 119

Advertising
background image

Chapter3

Exchanging and updating data using a HotSync

®

operation

119

Advanced HotSync

®

operations

Conducting a HotSync operation via a network

When you use the Network HotSync

®

application, you can take advantage

of the LAN and WAN connectivity available in many office environments.
The Network HotSync application enables you to perform a HotSync
operation by dialing in to a network (Network Modem Sync) or by using a
cradle that is connected to any computer on your LAN or WAN (LAN Sync)
(provided that the computer connected to the cradle also has the Network
HotSync application installed, your computer is on, and the HotSync
Manager is running).

To connect to your company’s dial-in server

The Network HotSync application requires the following:

• Your computer has TCP/IP support installed.

• Both your company’s network system and its remote access server support

TCP/IP.

• You have a remote access account.

Everything you need to connect to your company’s dial-in server (network
modem) is included in the Palm Desktop for CLIÉ software and your CLIÉ
handheld. You need to activate certain features, however, on both the Palm
Desktop for CLIÉ software and your CLIÉ handheld.

Preparing your computer

1

Click the HotSync

icon in the Windows task tray and

select Network from the shortcut menu.

2

Click the HotSync

icon in the Windows task tray again

and select Setup from the shortcut menu.

The Setup screen is displayed.

3

Click the Network tab and make sure your user name has a
check mark next to it. If the check mark is not there, click the
check box next to your user name.

4

Click OK.

Continued on next page

Advertising
This manual is related to the following products: