Samsung S3F80JB - Manual (Page 184)

INSTRUCTION SET S3F80JB
6-56
LDCPD/LDEPD
— Load Memory with Pre-Decrement
LDCPD/
LDEPD
dst,src
Operation: rr
← rr – 1
dst
← src
These instructions are used for block transfers of data from program or data memory from the
register file. The address of the memory location is specified by a working register pair and is first
decremented. The contents of the source location are then loaded into the destination location.
The contents of the source are unaffected.
LDCPD refers to program memory and LDEPD refers to external data memory. The assembler
makes 'Irr' an even number for program memory and an odd number for external data memory.
Flags: No flags are affected.
Format:
Bytes Cycles Opcode
(Hex)
Addr Mode
dst src
opc src | dst 2 14 F2 Irr r
Examples: Given: R0 = 77H, R6 = 30H, and R7 = 00H:
LDCPD @RR6,R0 ; (RR6
← RR6 – 1)
; 77H (contents of R0) is loaded into program memory location
; 2FFFH (3000H – 1H)
; R0 = 77H, R6 = 2FH, R7 = 0FFH
LDEPD @RR6,R0 ; (RR6
← RR6 – 1)
; 77H (contents of R0) is loaded into external data memory
; location 2FFFH (3000H – 1H)
; R0 = 77H, R6 = 2FH, R7 = 0FFH