Preparing control for hdmi function – Sony R-DG1200 User Manual

Page 85

Advertising
background image

85

US

D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\090OTH.fm

masterpage: Right

STR-DG1200

3-289-135-11(1)

Contr

o

l f

o

r HDMI

Preparing Control for
HDMI function

This receiver supports the Control for HDMI-
Easy Setting function.
This function is only available for certain
types of TV. When you perform the Control
for HDMI-Easy Setting on the TV, the Control
for HDMI setting on this receiver will
automatically change accordingly.
During the Control for HDMI-Easy Setting
operation, “SCANNING” flashes in the
display window. This receiver will
automatically change the input to HDMI input.
When the setting is completed,
“COMPLETE” appears on the display
window.
For details, refer to the operating instructions
of the TV.
If your TV does not support the Control for
HDMI-Easy Setting function, do the following
procedures. For details on setting the TV and
the connected components, refer to the
operating instructions of the respective
components.

1

Make sure that the receiver is connected to
the TV and components (compatible with
Control for HDMI function) via HDMI
connection.

2

Turn on the receiver, TV and connected
components.

3

Set the respective Control for HDMI
function for the receiver and TV to on.
See “To set Control for HDMI” (page 86).
When the receiver menu is displayed on the
TV screen in the screen mode, press GUI
MODE repeatedly to select “GUI OFF” to
enter the display mode, then check the TV
display image of the component connected
to the receiver.
For details on setting the TV, refer to the
operating instructions of the TV.

4

Select the HDMI input of the receiver and
TV to match the HDMI input of the
connected component, so that the image
from the connected component is displayed.

5

Set the Control for HDMI function for the
connected component to on.
If the Control for HDMI function for the
connected component is already set to on,
you do not need to change the setting.

6

Repeat steps 4 and 5 for other components
that you want to use the Control for HDMI
function.

Notes

• If you unplug and reconnect the HDMI cable, be

sure to repeat steps 1 to 6 above.

• You cannot perform One-Touch Play and System

Audio Control during the Control for HDMI-Easy
Setting operation.

• Before you do the Control for HDMI-Easy Setting

from the TV, be sure to turn on the TV, connected
components and receiver.

• If the playback components cannot function after

you have made the settings for Control for HDMI-
Easy Setting, check the Control for HDMI setting
on your TV.

• If the connected components do not support the

Control for HDMI-Easy Setting, you need to set
the Control for HDMI function for the connected
components to on before you perform the Control
for HDMI-Easy Setting from the TV.

Advertising
This manual is related to the following products: