Circuit adjustments, Electrical adjustment by remote commander – Sony KV 32S45 User Manual

Page 16

Advertising
background image

— 16 —

**WARNING: Do NOT turn off the power or AC immediately after pressing

then

. Wait at least 10 seconds

.

KV-32S40/32S45/34SL40/34SL40C/34SL40T/34SL45/35S40/35S45/37SL45/
32V40/32V65/34VL65/34VL65C/35V65/37VL65/37VL65C

ELECTRICAL ADJUSTMENT BY REMOTE COMMANDER

NOTE : Test Equipment Required:

1. Pattern Generator
2. Frequency Counter
3. Digital Multimeter
4. Audio OSC

(1) Method of Setting the Service

Adjustment Mode

SERVICE MODE PROCEDURE

1. Standby mode. (Power off)

2.

on the

Remote Commander.
(Press each button within a second.)

SERVICE ADJUSTMENT MODE IN

3. The CRT displays the item being adjusted.

4. Press

or on the Remote Commander to select the item.

5. Press

or on the Remote Commander to change the

data.

6. Press

then

to write into memory**.

SERVICE ADJUSTMENT MODE MEMORY

Green

7. Press

then

on the Remote Commander to

initialize.

SECTION 5
CIRCUIT ADJUSTMENTS

Disp.
(Item)

Item
data

SERVICE AFC 0

Use Remote Commander (RM-Y167) to perform the following circuit adjustments:

Red

SERVICE RESET

RM-Y167

Carry out step 7 when adjusting
IDs 0 to 4 and when replacing
and adjusting IC002.

SERVICE WRITE

8. Turn set off and on to exit. * CAUTION: Wait at least

10 seconds before turning off set.

(3) Adjust Buttons and Indicator

(2) Memory Write Confirmation Method

1. After adjustment, pull out the plug from the AC outlet,
then replace the plug in the AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confirm they were adjusted.

Advertising
This manual is related to the following products: