Sony HDW-S280 - Manual (Page 69)

69
Items in the Extended Setup Menu
C
h
a
p
te
r 9
S
e
tu
p M
e
nus
Items 400 to 499: Settings for preroll
a) When controlling with an editor such as a BVE-2000, select REEL for
quick cueup.
Items 500 to 599: Settings for tape protection
Item
number Item name Settings
401 FUNCTION MODE AFTER
CUEUP Select the state that the unit goes into after a cuing-up operation.
[STOP]: Stop (the stop mode)
STILL: Still playback (in search mode)
Note
When controlling this unit from an editor with the standard constants set, select STOP.
402 TIME REFERENCE FOR
PREROLL When prerolling a tape with timecode discontinuity, select whether or not to use CTL
pulses to count timecode from before a discontinuity.
[CTL]: Use CTL pulses to count timecode.
TC: Do not use CTL pulses to count timecode.
403 AUTOMATIC PREROLL
REFERENCE ENTRY Select whether or not the IN point is automatically set by pressing the PREROLL button,
when the IN point is not set before starting preroll.
[DIS]: IN point is not set automatically.
ENA: IN point is set automatically.
405 CUEUP BY CTL Select the tape transport mode when cuing. This setting is valid only when CTL/TC on
the HOME page of the function menu is set to CTL.
[CAP]: During cuing up, the tape transport is in the pinch ON state (maximum tape
speed 10 times normal).
REEL: During cuing up, the tape transport is in the pinch OFF state. As the tape
approaches the cue up point and the tape speed drops, the tape transport switches
to the pinch ON state.
a)
To give priority to editing accuracy, select CAP.
Item
number Item name Settings
501 STILL TIMER Select the time delay from the tape transport stopping (either the stop mode or the still
playback mode in search mode) until the unit automatically switches to the tape
protection mode, in order to protect the video heads and the tape.
0.5S to [8M] to 30M: Set the value in the range 0.5 seconds to 30 minutes.
502 TAPE PROTECTION
MODE FROM SEARCH Select the operation of the protection mode to protect the video heads and tape when in
the still playback mode in search mode (jog/shuttle).
[STEP]: Step forward at 0.2 time of the normal speed for 0.2 second.
STDBY: Switch to Standby OFF mode (the unit not on standby).
T.REL: Switch to tension release mode (the tape tension slackened).
503 TAPE PROTECTION
MODE FROM STOP Select the operation of the protection mode to protect the video heads and tape when
stopped (the stop mode).
[STDBY]: Switch to Standby OFF mode (the unit not on standby).
T.REL: Switch to tension release mode (the tape tension slackened).
STEP: Step forward at 0.2 time of the normal speed for 0.2 second.