Samsung 460DXN - Manual (Page 114)

EWF Displays or changes the drive settings.
Password Manages the password.
Setup
Rotation Rotates the screen with the selected option.
Program Runs or exits the program.
Exit Exits mnMain. If you exit mnMain, MagicNet X and the Schedule program are also exited
together.
EWF: Displays and changes the Drive settings
EWF State
z
Current state: Displays the current EWF state.
z Boot command: Displays the EWF state which will be applied at the next boot-up.
EWF command
z Disable and restart : Disables and restarts the EWF.
The EWF state is actually disabled at the next boot-up.
z Enable and restart : Enables and restarts the EWF.
The EWF state is actually enabled at the next boot-up.
z Commit : Saves the changes in the Enable state.
Password : Manages passwords for existing MagicNet X.
Verifies the password before you enter the Setup screen. If the Use Password lock checkbox is
checked, you need to verify your password again when entering the MagicNet X setup menu.