Spectra Logic RXT150 User Manual

Page 12

Advertising
background image

Chapter 2. Troubleshooting the RXT150

12

8. Locate the hole on the side of the RXT150. When you are looking at the front of

the unit, this hole is on the right side, near the back of the unit (Figure 2-5).

9. Insert a 5/64 Allen wrench into the hole, and rotate the wrench counter-

clockwise. The pack slowly ejects.

10. After removing the media from the RXT150, replace the cover on the top of the

unit.

11. Secure the cover with the three screws on the back.

12. Carefully turn the unit over and secure the four screws on the bottom.

13. Turn the RXT150 right side up again and return it to operation.

Figure 2-5

The hole on the right side of the unit.

Front

Back

Advertising