Sony WALKMAN MZ-NH1 - Manual (Page 62)

62
Dividing a track (Divide)
You can divide a track with a track mark,
creating a new track from the part
following the track mark. You can also
make fine adjustments to the track mark
position before making the actual
division. The track numbers will increase
as follows.
• You cannot add a track mark on a track that
has been transferred from your computer.
• You cannot divide a track that has been
recorded in Hi-MD mode using the MD
Simple Burner software.
• The Bookmark and Program settings will be
erased if you carry out the Divide function.
• You cannot divide a track at its beginning or
end.
• You cannot divide a track if after the division
causes the total number of tracks on the disc to
exceed the maximum allowed (2,047 tracks
for a disc used in Hi-MD mode or 254 tracks
for a standard disc).
While playing or pausing, press T MARK
on the recorder at the point you want to
mark.
“MARK ON” appears in the display, and
a track mark is added. The track number
will increase by one.
1
While playing, press T MARK for 2
seconds or more.
Four seconds of the track from the
point T MARK is pressed is played
back repeatedly.
Notes
1 3 4 2
2 3 1 4 5
Track marking
Track numbers increase.
T MARK
5-way control key
(NENT, FR, FF)
Jog dial
Dividing a track directly
Adjusting the dividing point
before dividing a track
(Divide Rehearsal)
The point T MARK is pressed.
Four seconds of the track plays back
repeatedly.