Intercom calls, A u to answer mode, Busy station callback – Samsung LCD 24Bi User Manual

Page 19: Making a call, Answering intercom calls, Voice announce mode

Advertising
background image

11

MAKING A CALL

• Dial the extension number or group number or press a Direct

Station Select D S S k e y.

• Wait for the party to answer. If you hear a brief tone burst instead

of ringback tone, the station you called is set for Voice announce
or Auto answer. Begin speaking immediately after the tone.

• Finish the call by replacing handset or press A N S / R L S k e y.

ANSWERING INTERCOM CALLS

• Lift the handset -O R- press the A N S / R L S k e y.
• To finish the call replace the handset or press the A N S / R L S

b u t t o n .

VOICE ANNOUNCE MODE

When another station calls you, your keyset will sound a brief
attention tone and you will hear the caller's announcement.

• Press A N S / R L S to turn on microphone and speak handsfree -

O R- lift the handset to reply.

• To finish the call, replace the handset or press the A N S / R L S k e y.

A U TO ANSWER MODE

When another station calls you, your keyset will sound a brief
attention tone and then automatically answer the call.

• Your microphone and speaker are turned on and you can speak

handsfree. For privacy, use the handset.

• To finish the call, replace the handset or press the A N S / R L S k e y.

BUSY STATION CALLBACK

When you call another station and receive a busy signal:

• Press the C B K key or dial 44.
• When the busy station becomes free, your keyset will ring.
• Lift the handset or press A N S / R L S to call the now idle station.

INTERCOM CALLS

»£¡÷«‚USER-

ª

π

Æ 98.7.16 12:52 PM

‰¿Ã¡ˆ11

Advertising
This manual is related to the following products: