Sharp PN-S655 - Manual (Page 19)

E
19
ENLARGE menu (When the input mode is PC)
Function Command Direction Parameter Reply Control/Response contents *
ENLARGE MODE EMAG WR 0-4 0-4 0: OFF, 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5
-
EMHV WR 11-55 11-55 1 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m and n are
the numbers of monitors specified for the longest direction and the
shortest direction respectively.)
BEZEL WIDTH WIDTH OF THE
SHORTER SIDE BEZH WR 0-100 0-100
WIDTH OF THE
LONGER SIDE BEZV WR 0-100 0-100
IMAGE POSITION (M x N) EPHV WR 11-55 11-55 Specify values in the order of ENLARGE-POS H/ENLARGE-POS V. (See
page 9.)
IMAGE POSITION (2 x 2) EPOS WR 0-3 0-3 See the description below.
IMAGE POSITION (3 x 3) EPOS WR 0-8 0-8
IMAGE POSITION (4 x 4) EPOS WR 0-15 0-15
IMAGE POSITION (5 x 5) EPOS WR 0-24 0-24
ENLARGED
SCREEN
POSITIONING THE LONGEST
DIRECTION EPSH WR -999-999 -999-999 The setting range depends on the ENLARGE MODE setting and the
IMAGE POSITION.
THE SHORTEST
DIRECTION EPSV WR -999-999 -999-999
ENLARGE/IMAGE POSITION SETTING ESTG WR XXYY XXYY XX: ENLARGE MODE (Same as EMAG), YY: IMAGE POSITION (Same
as EPOS)
ESHV WR XXYY XXYY XX: ENLARGE MODE (Same as EMHV), YY: IMAGE POSITION (Same
as EPHV)
• IMAGE POSITION (EPOS) setting
2 x 2 4 x 4 5 x 5 3 x 3
1
3
0
2
0 1 2
3 4 5
6 7 8
2
6
10
3
7
11
0
1
4 5
8 9
12
13 14
15
0
5
10
15
20
1
6
11
16
21
2
7
12
17
22
3
8
13
18
23
4
9
14
19
24
PIP/PbyP menu
Function Command Direction Parameter Reply Control/Response contents *
PIP MODES MWIN WR 0-3 0-3 0: OFF, 1: PIP, 2: PbyP, 3: PbyP2 B
PIP SIZE MPSZ WR 1-12 1-12 B
PIP POS THE LONGEST
DIRECTION MHPS W 0-100 B
R 0-100 B
THE SHORTEST
DIRECTION MVPS W 0-100 B
R 0-100 B
PIP V/H-POS MPOS W 0-100,0-100 Specify the position in MPOSxxxyyy format.
(xxx: Longer side, yyy: Shorter side position)
B
R 0-100,0-100 Returns a response in (xxx,yyy) format.
(xxx: Longer side, yyy: Shorter side position)
B
PIP BLEND MWBL WR 0-15 0-15 B
PIP SOURCE MWIP WR 1 1 PC1 DVI-D
B
2 2 PC3 D-SUB
3 3 AV3 COMPONENT
4 4 AV5 VIDEO
6 6 PC4 RGB
7 7 AV1 DVI-D
8 8 AV4 S-VIDEO
9 9 AV2 HDMI
10 10 PC2 HDMI
SOUND CHANGE MWAD WR 1-2 1-2 1: MAIN, 2: SUB B
MAIN POS (Main screen) MWPP WR 0-1 0-1 0: POS1, 1: POS2 B
PbyP2 POS (Sub screen) MW2P WR 0-2 0-2 0: POS1, 1: POS2, 2: POS3 B
AUTO OFF MOFF WR 0-1 0-1 0: MANUAL, 1: AUTO B
Initialization/Functional Restriction Setting (FUNCTION) menu
Function Command Direction Parameter Reply Control/Response contents *
ALL RESET RSET W 0-1 0: ALL RESET 1, 1: ALL RESET 2 -
ADJUSTMENT LOCK ALCK WR 0-2 0-2 0: OFF B
OSD DISPLAY LOSD WR 0-1 0-1 0: ON, 1: OFF B
LED OFLD WR 0-1 0-1 0: ON, 1: OFF B
TEMPERATURE ALERT TALT WR 0-2 0-2 0: OFF, 1: OSD & LED, 2: LED B
STATUS ALERT SALT WR 0-2 0-2 0: OFF, 1: OSD & LED, 2: LED B
Controlling the Monitor with a PC (RS-232C)