Sony RDR-GXD310 - Manual (Page 24)

24
Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
z Hint
When the connected equipment outputs only monaural sound, connect only the L (MONO) and VIDEO input jacks
on the front of the recorder. Do not connect the R input jack.
b Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
Connecting to the LINE 2 IN or LINE 4 IN jacks
AERIAL
~ AC IN
IN
OUT
COMPONENT
VIDEO OUT
P B /
C B
Y
P R /
C R
LINE
2
OUT
LINE
4
IN
LINE 1 - TV
VIDEO -AUDIO S VIDEO
R L
VIDEO -AUDIO S VIDEO
R L
DIGITAL OUT
COAXIAL
OPTICAL
PCM/DTS/MPEG/DOLBY DIGITAL
LINE 3
OUTPUT
S VIDEO AUDIO
L R
VIDEO
VCR, etc.
Audio/video cord
(not supplied) S-video cord
(not supplied)
to LINE 2 IN
DVD recorder (front)
: Signal flow
(rear)
to LINE 4 IN
VCR, etc.