Audio settings (audio) – Sony RDR-GXD310 User Manual

Page 81

Advertising
background image

81

Se
tti

n

g

s an
d Adj

u

st

m

ent
s

Audio Settings (Audio)

The “Audio” setup allows you to adjust the sound
according to the playback and connection
conditions.

1

Press SYSTEM MENU while the recorder is
in stop mode.

2

Select “SETUP,” and press ENTER.

3

Select “Audio,” and press ENTER.

The “Audio” setup appears with the following
options. The default settings are underlined.

Audio ATT (attenuation)

If the playback sound is distorted, set this item to
“On.” The recorder reduces the audio output level.
This function affects the output of the following
jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 1 – TV jack
– LINE 3 jack

Audio DRC (Dynamic Range Control) (DVDs
only)

Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
“Audio DRC.” This affects the output from the
following jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 1 – TV jack
– LINE 3 jack
– DIGITAL OUT (OPTICAL or COAXIAL) jack

only when “Dolby Digital” is set to “D-PCM”
(page 82).

Downmix (DVDs only)

Switches the method for mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see “4. Displaying the Playing Time
and Play Information” on page 31.
This function
affects the output of the following jacks:
– LINE 2 OUT R-AUDIO-L jacks
– LINE 1 – TV jack
– LINE 3 jack
– DIGITAL OUT (OPTICAL or COAXIAL) jack

when “Dolby Digital” is set to “D-PCM”
(page 82).

Audio Connection

The following setup items switch the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack.
For connection details, see “Step 4: Connecting
the Audio Cords” on page 17
.
Select “Dolby Digital,” “MPEG,” “DTS,” and
“48kHz/96kHz PCM” after setting “Digital Out”
to “On.”

If you connect a component that does not accept
the selected audio signal, a loud noise (or no
sound) will come out from the speakers, and may
affect your ears or cause speaker damage.

1

Select “Audio Connection” in “Audio,” and
press ENTER.

On

Select this when the playback
sound from the speakers is
distorted.

Off

Normally select this position.

SETUP

Off

Audio ATT :

Settings

DTV Settings

Video

Audio

Features

Password

Options

Easy Setup

Audio Connection

Downmix :

Audio DRC :

Dolby Surround

Standard

Standard

Normally select this position.

TV Mode

Makes low sounds clear even if
you turn the volume down.

Wide
Range

Gives you the feeling of being at a
live performance.

Dolby
Surround

Normally select this position.
Multi-channel audio signals are
output to two channels for
enjoying surround sounds.

Normal

Multi-channel audio signals are
downmixed to two channels for
use with your stereo.

,continued

Advertising