Selecting the recording speed, Protecting a recorded cassette, Recording a programme immediately – Samsung DVD-V5600 User Manual

Page 24

Advertising
background image

24

- English

Selecting the Recording Speed

Video cassettes have a safety tab to prevent
accidental erasure. When this tab has been
removed, you cannot record on the tape.

1

If you wish to protect a cassette, break off the
tab using a small screwdriver.

2

To re-record over a protected cassette (safety
tab broken), cover the hole with adhesive
tape.

You can record a cassette at two different
speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality

1

Press the SPEED button to select SP or LP.
• The selected record speed will appear on

the front panel display.

Type

Recording Time (in SP)

E180

180 mins. or 3 hours

E240

240 mins. or 4 hours

E260

260 mins. or 4 hours and 20 mins.

E300

300 mins. or 5 hours

Protecting a Recorded Cassette

Recording a Programme
Immediately

Before recording a programme, you must have
preset the corresponding station (unless you are
recording via an external video source). If you
have not done so, refer to pages 16~17.

1

Switch on the television.

2

Insert the video tape in to the VCR deck, with
the window visible and the safety tab intact or
the opening covered with adhesive tape. The
DVD-VCR is switched on automatically.

3

Select the station by pressing the PROG
( or ) button or select the source (AV1,
AV2 or AUX) by pressing the INPUT SEL.
button for a satellite tuner or external video
source. The station number is displayed and
the programme can be seen on the television.

4

Select the recording speed by pressing the
SPEED button as many times as required.

5

Hold down the REC (

●) button for a while to

start recording.
The record indicator appears on the television
and DVD-VCR display. An index is recorded
on the tape (Refer to page 30).

6

To stop recording, press the

■ button once.

• If your DVD-VCR ejects the cassette when

you start recording, check to make sure
that the cassette’s safety tab is intact or
that the opening (Created by a broken
safety tab) is overed with adhesive tape.

• If you reach the end of the tape while

recording, the cassette rewinds
automatically.

XEU ENG 4 27/02/2006 13:36 Page 24

Advertising
This manual is related to the following products: