Recording a programme with automatic stop, Recording from another vcr or camcorder – Samsung DVD-V5600 User Manual

Page 25

Advertising
background image

English - 25

Recording from Another VCR or
Camcorder

You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
Camcorder etc.
• It is an infringement of copyright laws to copy

prerecorded cassettes or to re-record them in
any form without the permission of the owners
of the corresponding copyright.

1

Connect the output jack of your external
devices to the SCART input connector or AUX
on the front or rear of the DVD-VCR.

2

Insert a blank cassette in your DVD-VCR.

3

Insert the pre-recorded cassette in the other
video source (VCR or Camcorder etc).

4

Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR:
• AV1, AV2 for the SCART input.
• AUX for the RCA input.

5

Start playing back the cassette to be copied.

6

Hold down the REC (

●) button for a while to

start recording on your DVD-VCR.

7

When you have finished recording, press the
■ button on both VCR and DVD-VCR.
• If you wish to view the cassette being

copied, your DVD-VCR must be connected
as usual to the television (Refer to page 9
for further details).

Recording a Programme with
Automatic Stop

This function enables you to record up to nine
hours (LP) of programmes.Your DVD-VCR stops
automatically after the requested length of time.

1

Switch on the television.

2

Insert the cassette on which the programme
is to be recorded, with the window visible and
the safety tab intact or the opening covered
with adhesive tape. The DVD-VCR is
switched on automatically.

3

Select the station to be recorded by pressing
the PROG( or ) button or select the
source (AV1, AV2 or AUX) by pressing the
INPUT SEL. button for a satellite tuner or
external video source. The station number is
displayed and the programme can be seen on
the television.

4

Select the recording speed by pressing the
SPEED button as many times as required
(Refer to page 24).

5

Hold down the REC (

●) button for a while to

start recording. The record indicator appears
on the television screen and DVD-VCR dis-
play. An index is recorded on the tape (Refer
to page 30).

6

Press the REC (

●) button several times to

increase the recording time in:
• 30-minute intervals up to four hours.
• 1-hour intervals up to nine hours.
The length is displayed on the television dis-
plays. The selected programme is recorded
for the length of time requested. At the end of
that time, the DVD-VCR stops recording auto-
matically and power off.

7

If you wish to cancel the recording before the
end, press the STANDBY/ON button.
• If the end of the tape is reached while

recording, the recording stops and power off.

LENGTH 2:30

SET LENGTH :

PRESS

REC

XEU ENG 4 27/02/2006 13:36 Page 25

Advertising
This manual is related to the following products: