Siemens CMTC1913 - Manual (Page 14)

Adjusting the OSD screen
14
Building Technologies
CMTC1713_1913 User Manual
Fire Safety & Security Products 19/12/2008
PC setup (only in DVI-A mode)
Option Function Values
Auto Adjust Auto geometry adjustment
Phase Adjusts the number of horizontal picture elements 0 - 100
H-Position Adjusts the horizontally picture position 0 - 100
V-Position Adjusts the vertically picture position 0 - 100
Frequency Adjusts the vertical noise of screen image 0 - 100
9.4 Information
Firmware version Displays the version of the monitor firmware