Siemens CMTC1913 - Manual (Page 9)

Hardware Description
9
Building Technologies CMTC1713_1913 User Manual
Fire Safety & Security Products 19/12/2008
7.3 Remote functions
POWER: Turns the power ON or OFF
SOURCE: Selects input source (AV1, AV2, S-Video, DVI-D, DVI-
A)
APC (Auto Picture Control): Selects Picture mode [J 11]
ACC (Auto Color Control): Selects Color tone [J 11]
AV1: Selects AV1 input source
AV2: Selects AV2 input source
S-VIDEO: Selects S-VIDEO input source
PC: Selects DVI input source (DVI-A, DVI-D)
AUTO: Auto geometry adjustment (only in DVI mode)
MUTE : Mutes the sound
MENU: Enters and exits the OSD menu [J 11]
EXIT: Exits the OSD menu
VOL◀▶: Adjusts the level of audio volume
UP/DOWN: Moves upwards/downwards in the OSD menu
ENTER: Enters an OSD submenu or accepts your selection
INFO: Displays information about input source and picture mode
STILL: Pauses the picture
7.4 Power management
This monitor features a power management system to “power down” upon receipt
of a signal from a VESA DPMS-compliant video card.
Display Power Management Signaling (DPMS) is a VESA interface standard that
reduces power to computer monitors, when not in use. DPMS defines 4 power
management modes for monitors in idle state: Power On, Standby, Suspend and
Power Off.
Power consumption
Mode Power consumption
Power On < 50 W
Standby < 11 W
Suspend < 11 W
Power Off < 8.5 W
LED Indicator
Mode Color Monitor operation
Power On Green Normal operation
Standby
Suspend Red blinks Screen blanks after preset idle time and the monitor
shuts down
Power Off Red Not operation