Error messages, To eject discs with the unit powered off, About i.link – Sony PDW-F70 User Manual

Page 114: Alarms relating to sensors and drives, What is i.link

Advertising
background image

114

About i.LINK

A

ppen

dix

a) Displayed only when DISPLAY CONTROL >ALARM is set to “ON”.

Alarms relating to sensors and drives

Error Messages

Error codes appear in the time data display when an error
(usually a hardware problem) occurs. In addition, both
error messages and error codes appear in the monitor video
section and on the video monitor connected to the unit.
When an error message appears, follow the instructions in
the error message to resolve the problem.

To Eject Discs With the Unit
Powered Off

As an emergency measure, disc cartridges can be removed
with the unit powered off. This operation should always be
done by a trained service technician.

About i.LINK

This section explains the specifications and features of
i.LINK.

What is i.LINK?

i.LINK is a digital serial interface designed to integrate
devices equipped with i.LINK connectors. i.LINK allows
your device to:
- Perform two-way transmission and reception of data

such as digital audio and digital video signals.

- Control other i.LINK devices.
- Easily connect multiple devices with a single i.LINK

cable.

Your i.LINK device is capable of connecting to a wide
range of digital AV devices for data transfer and other
operations.
Other advantages include the following feature. When
connected to multiple i.LINK devices, your i.LINK device
can perform data transfer and other operations not only
with the directly connected devices but also with any of the
devices that are connected to those devices. Therefore, you
do not need to be concerned with device connection order.
However, depending on the features and specifications of
the connected devices, you may need to use certain
functions differently, and you may not be able to transfer
data or perform certain operations.

i.LINK, a nickname for IEEE 1394 proposed by Sony, is a
trademark supported by many companies worldwide.
IEEE 1394 is an international standard defined by IEEE,
the Institute of Electrical and Electronics Engineers, Inc.

EMPHASIS!

a)

INPUT AUDIO EMPHASIS IS NOT
SUPPORTED.
CHECK THE EMPHASIS OF THE AUDIO
INPUT SIGNAL.

Check the emphasis of the audio input signal.

Alarm message in time
data display section

Alarm message in monitor video
section

Action

Alarm message in time
data display section

Alarm message in monitor video
section

Description/action

FAN Stopped

FAN MOTOR STOPPED.

Contact your Sony dealer.

Note

The unit will not stop operating, but if you continue to
use it in this state temperatures inside the unit or the
drive will rise, possibly resulting in failure or fire.

DR-FAN Stop

DRIVE FAN MOTOR STOPPED.

High TEMP!

HIGH TEMPERATURE.

HIGH TEMPERATURE IN DRIVE.

ERROR

AN ERROR HAS BEEN

DETECTED. INFORM SERVICE

OF FOLLOWING CODE:

50-010

PRESS EJECT KEY

TO EJECT DISC.

Error code

Error code in time data display section

Error code in monitor video section

Advertising