Specifications, About data transfer speed of i.link, I.link operation with this unit – Sony PDW-F70 User Manual

Page 115: General, System

Advertising
background image

115

Specifications

A

ppe

ndix

The unit can be connected to one device with the i.LINK
cable (DV cable). When you connect with a device that has
two or more i.LINK connectors, refer to the operating
instructions supplied with the connected device.

About data transfer speed of i.LINK

i.LINK defines maximum data transfer speeds of
approximately 100, 200 and 400 Mbps

1)

that are referred

to as S100, S200 and S400 respectively.
The maximum data transfer speed that an i.LINK device
supports is identified on the specifications page of the
operating instructions supplied with the device or near its
i.LINK connector.
When you connect a device that supports different data
transfer speeds, the actual data transfer speeds may be
different from those indicated on the i.LINK connectors.

1) What is Mbps?
Megabits per second. A measure of the rate at which data
is transmitted per second. In case of 100 Mbps, 100
Megabits of data can be transmitted per second.

i.LINK operation with this unit

For details on operation when other equipment with an
i.LINK (DV) connector is connected, see Chapter 2 (page
23)
.
For details on connection with an i.LINK cable and the
necessary software, refer to the operating instructions
supplied with the connected device.

Use Sony i.LINK cables
Use Sony i.LINK cables to connect the i.LINK devices.
6 pins

y 4 pins (For DV dubbing)

6 pins

y 6 pins (For DV dubbing)

i.LINK and are trademarks.

Specifications

General

External dimensions (w/h/d, excluding projections)

307 Ч 100 Ч 411 mm
(12

1

/

8

Ч 4 Ч 16

1

/

4

inches)

Mass

7.2 kg (15 lb 13 oz)

Power requirements

100 V to 240 V AC, 50/60 Hz

Power consumption

0.79-0.33 A

Peak inrush current

(1) Power ON, current probe method:

45 A (240 V), 15 A (100 V)

(2) Hot switching inrush current,

measured in accordance with
European standard EN55103-1: 7 A
(230 V)

Operating temperature

5ºC to 40ºC (41ºF to 104ºF)

Storage and transport temperature

–20ºC to +60ºC (–4ºF to +140ºF)

Operating relative humidity (no condensation allowed)

25% to 80% (RH)

Storage and transport relative humidity (no condensation
allowed)

20% to 90%

System

Recording format
Video

MPEG HD: HQ35/SP25/LP18 Mbps

Proxy video

MPEG-4

1)

Audio

MPEG HD: 16 bits, 48 kHz, 4/2 channels

Proxy audio

A-law 8 bits, 8 kHz, 4 channels

Note

307(12

1

/

8

)

100(4)

411(16

1

/

4

)

in mm (inches)

Advertising